[c-nsp] multicast on layer 2

[Gert Doering]

Hi,

On Mon, Jun 27, 2005 at 04:14:42PM +0200, Tantsura, Jeff wrote:
> Presence of layer 3 interface on the same VLAN could change the picture.
> Since sources and receivers would register on it enabling PIM could help.

Sources do not register - they just send packets.  Routers attached
to the source register at the PIM RP, but this is independent of 
directly attached receivers.

gert
-- 
Gert Doering
Mobile communications ... right now writing from * Isola dei Gabbiani *