[c-nsp] HIGH RANGE INPUT - 6509 power supply

[Dave Temkin]

You need to run it at 200-240V to get 2500W out of it, otherwise it'll
just run at 1300W.

-Dave

On Wed, 29 Jun 2005, noc ops wrote:

> Hi,
>
> Just trying to understand the reading off my 6509 PWS which reads on the
> unit itself:
>
>
> LOW RANGE
> Input (ac)
> 100 - 200v
> 50/60 Hz
> 16 A
> 1300w maximum output power
>
>
> HIGH RANGE
> Input (ac)
> 200 - 240v
> 50/60 Hz
> 16 A
> 2500w maximum output power
>
>
> Does high range input imply, 2500w if both inputs are 110v?
>
>
> regards,
> /vicky
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>