[c-nsp] HIGH RANGE INPUT - 6509 power supply

[noc ops]

I'm guessing if I had ip phones drawing power off this unit then I would 
need to worry about 2500W output otherwise I guess I'm ok w/ 1300W 
output using 110v for server farms.


regards,
/vicky


Dave Temkin wrote:
> You need to run it at 200-240V to get 2500W out of it, otherwise it'll
> just run at 1300W.
> 
> -Dave
> 
> On Wed, 29 Jun 2005, noc ops wrote:
> 
> 
>>Hi,
>>
>>Just trying to understand the reading off my 6509 PWS which reads on the
>>unit itself:
>>
>>
>>LOW RANGE
>>Input (ac)
>>100 - 200v
>>50/60 Hz
>>16 A
>>1300w maximum output power
>>
>>
>>HIGH RANGE
>>Input (ac)
>>200 - 240v
>>50/60 Hz
>>16 A
>>2500w maximum output power
>>
>>
>>Does high range input imply, 2500w if both inputs are 110v?
>>
>>
>>regards,
>>/vicky
>>
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> 
>