[c-nsp] OSM card in Csico 7609

[Shahar Grin]

Hi all,
we are trying to add OSM-4GE-WAN-GBIC module to a 7600 
the module is up
 
Down#sh module 3
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  3    0  4 port gigabit GE                      OSM-4GE-WAN-GBIC   SADXXXXXX
 
Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  3  0003.fea9.62da to 0003.fea9.62e9   1.0   12.1(26)E    12.1(26)E    Ok
 
Mod Online Diag Status 
--- -------------------
  3 Not Applicable
Down#
 
we see these messages on the log
 
013697: Jun 27 19:35:59 IDT(GMT: %CWAN_RP-6-CARDRELOAD: Module
reloaded on slot 3/0
Jun 27 19:36:01 IDT(GMT: %DIAG-SP-3-NO_TEST: Module 3: No test to run
013698: Jun 27 19:36:01 IDT(GMT: %SNMP-5-MODULETRAP: Module 3 [Up] Trap
Jun 27 19:36:01 IDT(GMT: %OIR-SP-6-INSCARD: Card inserted in slot 3,
interfaces are now online
 
Down#sh cwan stats 
5163 unknown VLANs
0 ATM packets with zero src_ltl or inactive VC
0 unknown enctype
0 output unknown enctype drops
0 particle alloc failures
0 pak alloc failures
 
 
 
but we dont see any GE-WAN interfaces in the configuration or in show interface.
 
This card work without a problem in other router