[c-nsp] Re: VLAN subinterfaces on 7609 Router

[Wes Decker]

Hi again,
    Since the configuration didn't format to well with
mail conversion I will do it vertically.....sorry.
( ++++ indicate bidirectional connection )
          
Agilent Router Tester
Port 0
192.7.1.1
VID 4
 
  +
  +  192.7.1.x  Subnet
  +
  +|

G6/3(.4)   Gigabit port on CISCO 7609
  +        IP Addr 192.7.1.254
CISCO
7609
  +
G6/1(.2)   Gigabit port on CISCO 7609
           IP Addr 192.11.1.254
  +
  + 192.11.1.x Subnet
  + VLAN 2
  +

GbE Port 0  (in house)
  +
[switch]    (in house)  (swaps VLAN ID 2 and 3)
  +
GbE Port 1  (in house)
 
  +
  +  192.11.1.x Subnet
  +  VLAN 3
  +
  +

Agilent Router Tester
Port 1
192.11.1.1
VID 3
      

Thanks again....

Wes Decker
(wdecker at tellabs.com)
============================================================
The information contained in this message may be privileged
and confidential and protected from disclosure. If the reader
of this message is not the intended recipient, or an employee
or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any reproduction,
dissemination or distribution of this communication is strictly
prohibited. If you have received this communication in error,
please notify us immediately by replying to the message and
deleting it from your computer. Thank you. Tellabs
============================================================