[c-nsp] SYS-2-CHUNKBADMAGIC error

[Dave Mifsud]

Hi Oli,

Thanks for the reply. Below is the show version. We do
not have a smartnet agreement on this router though, so
guess we cannot go through TAC.

Dave

malta-router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.2(7b), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 05-Mar-02 04:37 by pwade
Image text-base: 0x600109C8, data-base: 0x619F0000

ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc
1)
BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(7b), RELEASE SOFTWARE (fc1)

malta-router uptime is 48 weeks, 6 days, 20 hours, 51 minutes
System returned to ROM by reload at 14:29:51 UTC Thu Dec 6 2001
System restarted at 11:54:12 CET Thu Mar 25 2004
System image file is "slot0:rsp-jsv-mz.122-7b.bin"

cisco RSP4 (R5000) processor with 262144K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Bridging software.
TN3270 Emulation software.
Chassis Interface.
2 VIP2 R5K controllers (1 FastEthernet)(1 Serial)(1 ATM).
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ATM network interface(s)
123K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).

Slave in slot 3 is running Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-DW-M), Version 12.2(7b), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 04-Mar-02 18:38 by pwade
Slave: Loaded from system
Slave: cisco RSP4 (R5000) processor with 262144K bytes of memory.

Configuration register is 0x102



On 03/03/2005 08:37 AM, Oliver Boehmer (oboehmer) wrote:
> Dave,
> 
> 
>>Am getting the error below once every minute.
>>
>>Any help in identifying what could be wrong is much appreciated!
>>
>>
>>%SYS-2-CHUNKBADMAGIC: Bad magic number in chunk header, chunk 0  data
>>6780AA50  chunkmagic D0D0D0D  chunk_freemagic D0D0D0D
>>-Process= "BGP Scanner", ipl= 0, pid= 132
>>-Traceback= 603445AC 6074590C 60745E20 6033D16C 6033D158
> 
> 
> we need more info to troubleshoot this, at least a "show version" to
> decode the traceback.. you might want to contact TAC to have them take a
> look at it with the full info..
> 
> 	oli
>