[c-nsp] IOS 12.3x on Cisco 7206 (NPE-100)??

[Peter Walker]

This was discussed on this list in January.  A good summary was


> ------------ Forwarded Message ------------
> Date: 10 January 2005 16:46 -0800
> From: Roy <garlic at garlic.com>

> Subject: Re: [c-nsp] 12.0.30S (NPE-150)
>
> So let me see if I can summarize:
>
> For the non-VXR 7200
>
> The NPE-100 and NPE-150 are not supported and not long will work in
> newer releases
>
> The NPE-175 and NPE-200 are not supported but are working.  They are
> basically on borrowed time
>
> The NPE-225 is presently supported and seems to be the only
> supported NPE for the non-VXR chassis.
>
>
> For the 7200 VXR chassis:
>
> The NPE-225, NPE-400, and NPE-G1 are supported
>
> The NPE-300 and 7200-I/O-FE are not supported as of 12/31/2004 but
> are working.  They are basically on borrowed time
>
> The NSE-1 will not be supported after 3/31/2005
>
>
>



--On 03 March 2005 16:59 -0500 "Robert E.Seastrom" <rs at seastrom.com> 
wrote:

>
> Gert Doering <gert at greenie.muc.de> writes:
>
>> Again, it's well possible that 12.3 will *not boot* on NPE-100,
>> due to lack of hardware support.  The only supported NPEs in 12.3
>> are NPE-225 and faster (and the only supported one that will fit
>> your non-VXR is the  NPE-225).
>
> Empirical $0.02: I have 12.3T running on a non-vxr in the lab with
> an NPE-200 in it.  Trying to boot this image with an NPE-150
> resulted in a crash - the router did not come all the way up.
>
>                                         ---Rob
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>