[c-nsp] Supervisor 3G not showing time

[Colin Jenkinson]

Has anybody come across the problem with a Cat5000 Sup IIIG not
displaying
the time after it is set. It was working fine until I upgraded to
6.4(14).
I tried the upgrade on a spare module and it does the same thing. I
reverted
back to a 5.5 version but still the time shows as 0000  00 00:00:00

e.g.
RI_G6_5513_SE3> (enable) set time 12:01:00 03/07/2005
0 0000, 00:00:00 AEDT
Warning: NTP will override locally set time.
RI_G6_5513_SE3> (enable) show time
0 0000, 00:00:00 AEDT
RI_G6_5513_SE3> (enable)


RI_G6_5513_SE3> (enable) show logging buffer
Uptime at 0 0000, 00:00:00 AEDTis 14 days, 11 hours, 11 minutes.
0000  00 00:00:00 AEDT +11:00 %PAGP-5-PORTFROMSTP:Port 8/5 left bridge
port 8/5
0000  00 00:00:00 AEDT +11:00 %PAGP-5-PORTTOSTP:Port 8/5 joined bridge
port 8/5
0000  00 00:00:00 AEDT +11:00 %PAGP-5-PORTTOSTP:Port 8/20 joined bridge
port 8/

RI_G6_5513_SE3> (enable) show ver
WS-C5500 Software, Version McpSW: 6.4(14) NmpSW: 6.4(14)
Copyright (c) 1995-2004 by Cisco Systems
NMP S/W compiled on Nov 29 2004, 18:49:50
MCP S/W compiled on Nov 29 2004, 18:37:05

System Bootstrap Version: 5.1(1)

Hardware Version: 1.3  Model: WS-C5500  Serial #: 069020220

Mod Port Model      Serial #  Versions
--- ---- ---------- --------- ----------------------------------------
1   2    WS-X5550   021220522 Hw : 1.2
                              Fw : 5.1(1)
                              Fw1: 5.2(1)
                              Sw : 6.4(14)
-- 
   Colin E Jenkinson
   Team Member Networking
   Information Technology Directorate
   University of Western Sydney                  
mailto:C.Jenkinson at uws.edu.au