[c-nsp] 12000 & EoMPLS

[Nikos Leontsinis]

Imagine 2 cisco 1200 directly connected via a STM4 interface, you want on
each end to connect a CE in such a way as to create an Ethernet Pseudowire
and carry Ethernet/802.3 Protocol Data Units over the MPLS network. In this
scenario the 1200 is both a PE and P (using engine 3). Is that possible or
you need to have other routers on the edge and have the 12000 act as P
routers? 


#-----Original Message-----
#From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com]
#Sent: Wednesday, March 09, 2005 3:28 PM
#To: nikos at oteglobe.net
#Cc: cisco-nsp at puck.nether.net
#Subject: RE: [c-nsp] 12000 & EoMPLS
#
#
#> Anyone knows if the 12000 series support PE & P FUNCTIONALITY (on the
#> same box) on the EoMPLS service?
#> As far as I know, in the 7600 services you cannot have a layer 2
#> connection between PEs with Ethernet over MPLS. In other words the
#> 7600 can only act as PE. Does the same hold for the 12000?
#
#Don't really understand your question. What do you want to achieve? Can
#you describe the topology in more detail?
#
#	oli
#
#--
#This message has been scanned for viruses and
#dangerous content by MailScanner, and is
#believed to be clean.



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.