[c-nsp] 12000 & EoMPLS

[sthaug at nethelp.no]

> Imagine 2 cisco 1200 directly connected via a STM4 interface, you want on
> each end to connect a CE in such a way as to create an Ethernet Pseudowire
> and carry Ethernet/802.3 Protocol Data Units over the MPLS network. In this
> scenario the 1200 is both a PE and P (using engine 3). Is that possible or
> you need to have other routers on the edge and have the 12000 act as P
> routers? 

Actually, in MPLS terms the 12000 routers will both be PE routers in
this configuration. Yes, this works.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no