[c-nsp] Downgrade 6509 w/ Sup720 to CatOS

[Josh Duffek]

What about using the monitor command in IOS to send traffic to your IDS
port?  

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Rossella Mariotti-Jones
> Sent: Thursday, March 10, 2005 2:24 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Downgrade 6509 w/ Sup720 to CatOS
> 
> We are looking into downgrading our core switch to CatOS so that we
can
> use our IDS to block using VACLs. Right now we're running IOS V.
> 12.2(17d)SXB and we have Sup720. Has anybody attempted this before? it
> appears that we are going to have to go through the current config
line
> by line and re-enter it into the 6500 after we roll back, I'd like to
> get this done as smoothly and quickly as possible, does anybody have
any
> suggestions as far as how to tackle this? What are the things I have
to
> watch out for? Any recommendations? Any help would be greatly
> appreciated. Thanks in advance.
> 
> 
> 
> Rossella Mariotti-Jones
> 
> Network Analyst, CCNA
> 
> Chemeketa Community College / IT
> 
> T 503 589 7775
> 
> F 503 399 4898
> 
> E rossella at chemeketa.edu <mailto:rossella at chemeketa.edu>
> 
> www.chemeketa.edu
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/