[c-nsp] Tell me if I am in the right place or if I need to gosomewhere else...... Like others have done.

[Voll, Scott]

If your not doing any Vlan's all you should need is a cross over cable
(12 and 45 reversed).

If you are vlaning they you will need to set it up as a trunk.  (cisco
search 802.1q).

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joe Gilliam
Sent: Monday, March 14, 2005 1:26 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Tell me if I am in the right place or if I need to
gosomewhere else...... Like others have done.

I am an absolute cisco newbie.  
 
I was given two 2948 G switches, one was an L3.  The 2948G was easy.
The L3 is a hard one to configure.
 
I am trying to read and work on the L3 switch as I go.  I am having all
kinds of trouble setting
up the switch for what I would call a simple basic switch / router.
 
I managed to get in, reset all the congfigs, change the hostname, change
the passwords, configure the telnet session, test it, and save the
config to the startup-config.  I also turned on all the ports.
 
Port 48 was set up for 192.168.0.254 / 24.  
 
I have been reading in the configuration manual for this darn thing and
all in need now is how
to setup an uplink port to another switch.  I don't have any Gbics in
this box.  I am only using the available 48 ports.  I have 48 set for
telnet.  I already know I can't uplink on that port now.
 
So how do I set it up so another switch can uplink to this one?  Through
port 47?
I can't find it in the book, or I am using the wrong term.
 
I am going to use this switch at lan parties.  So I am not going to do
anything complecated.
I am just going to link another switch so that I can have the other
switch and internet on this one.  DHCP will be from a hardware DHCP
server.
 
I am a systems Admin for a hospital Pacs system.  I run all the computer
databases and image systems.  I rarely get involved in the network
switch config.  So I consider this a major learning experience.  I am
willing to do everything by myself, but I just need a little guidance so
I can continue.  Right now, I am stuck.
 
Again, IF I am in the wrong place, Just tell me where I need to go.  I
will not bug you guys again if that is the case.
 
Thanks in advance.
 
Joe Gilliam
Wichita, Kansas
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/