[c-nsp] tracking what going on with the router

[Luan Nguyen]

Thanks. Great feature. The weird part is that it's in 12.3.13 mainline but
not in 12.3.11T3.  

Luan
P.S  look familiar, I think I saw similar in crashlog file?

-----Original Message-----
From: Dennis Peng [mailto:dpeng at cisco.com] 
Sent: Wednesday, March 16, 2005 2:21 PM
To: Luan Nguyen
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] tracking what going on with the router

In more recent code, you can do "show history all" to see a list of
commands (and console messages) that were executed recently. A log
message should tell you from which line the router was configured
from.

Dennis

Luan Nguyen [luan.nguyen at mci.com] wrote:
> Hi All,
> 
> Is there a way to see what commands enter into the router through CLI or
> through copy tftp running-config?
> 
> These changes will be made through vty connections.  I have console access
> and I'd like to monitor/see what they run.  I can't use aaa.
> 
> It would be nice to do like show history vty 1 and see a list of
> command/changes made by that line.
> 
>  
> 
> Thanks.
> 
>  
> 
> Luan
> 
>  
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/