[c-nsp] tracking what going on with the router

['Dennis Peng']

Luan Nguyen [luan.nguyen at mci.com] wrote:
> Thanks. Great feature. The weird part is that it's in 12.3.13 mainline but
> not in 12.3.11T3.  

It was introduced in 12.3(11.9) and 12.3(11.9)T by CSCed22297, so
12.3(11)T doesn't have it. The next release of 12.3T will though.
 
> Luan
> P.S  look familiar, I think I saw similar in crashlog file?

Yep! Exactly. It's just a dump of a buffer that had the info all
along...

Dennis
 
> -----Original Message-----
> From: Dennis Peng [mailto:dpeng at cisco.com] 
> Sent: Wednesday, March 16, 2005 2:21 PM
> To: Luan Nguyen
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] tracking what going on with the router
> 
> In more recent code, you can do "show history all" to see a list of
> commands (and console messages) that were executed recently. A log
> message should tell you from which line the router was configured
> from.
> 
> Dennis
> 
> Luan Nguyen [luan.nguyen at mci.com] wrote:
> > Hi All,
> > 
> > Is there a way to see what commands enter into the router through CLI or
> > through copy tftp running-config?
> > 
> > These changes will be made through vty connections.  I have console access
> > and I'd like to monitor/see what they run.  I can't use aaa.
> > 
> > It would be nice to do like show history vty 1 and see a list of
> > command/changes made by that line.
> > 
> >  
> > 
> > Thanks.
> > 
> >  
> > 
> > Luan
> > 
> >  
> > 
> >  
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/