[c-nsp] backend & frontend T1s on same router?

[Arie Vayner]

MPLS/VPN or several VRFs is the solution for you.
If it's only one router, than you do not need real MPLS...

Arie


On Fri, 18 Mar 2005 14:29:34 -0800, matthew zeier <mrz at intelenet.net> wrote:
> When an end user orders a T1 from me, it either goes into a "big router" on
> a DS3 hub or is patched into his cabinet and sits on his network, in which
> case it's not on the hub and requires a seperate router.
> 
> I'd like to be able to have both private-backend T1s and plain-jane T1s on
> the same DS3 hub and router.  Is there some solution using VRF/MPLS I can
> rig up?
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>