[c-nsp] backend & frontend T1s on same router?

[matthew zeier]

Would you happen to have config examples handy?

----- Original Message ----- 
From: "Arie Vayner" <arievayner at gmail.com>
To: "matthew zeier" <mrz at intelenet.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Friday, March 18, 2005 10:35 PM
Subject: Re: [c-nsp] backend & frontend T1s on same router?


> MPLS/VPN or several VRFs is the solution for you.
> If it's only one router, than you do not need real MPLS...
>
> Arie
>
>
> On Fri, 18 Mar 2005 14:29:34 -0800, matthew zeier <mrz at intelenet.net> 
> wrote:
>> When an end user orders a T1 from me, it either goes into a "big router" 
>> on
>> a DS3 hub or is patched into his cabinet and sits on his network, in 
>> which
>> case it's not on the hub and requires a seperate router.
>>
>> I'd like to be able to have both private-backend T1s and plain-jane T1s 
>> on
>> the same DS3 hub and router.  Is there some solution using VRF/MPLS I can
>> rig up?
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>