[c-nsp] ospf fast hello

[BALLA Attila]

Hi,

   I set the ospf fast hello with 333ms (ip ospf dead minimal hello 3) on a 
GSR PRP-1. Everything was working properly, but when I used the wri 
command, the neighbors (both on POS and GE) lost this GSR with dead-time 
experied... ;-(
   We had no problem with the other routers (7200 and GSR with GRP/B)
   It happened only once, but I couldn't keep the config, because it is an 
ISP network.
   I think, we should use the max-process-time 50 for next try.
   Anybody has any other idea or experience?

BR,
   Attila