[c-nsp] 6509 Switch Utilization lights

[Paul Stewart]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

True that these devices don't get a lot of load.. nice thing about
6509's is that they do need a lot of traffic to get loaded down..:)

sh proc

CPU utilization for five seconds: 2%/1%; one minute: 6%; five minutes: 5%

Because of this, I thought that I would at least see one bar lit up...

gw-6509-1#show catalyst6000
~  chassis MAC addresses: 1024 addresses from 0004.defd.f400 to
0004.defd.f7ff
~  traffic meter =   1%  Never cleared
~           peak =  12%        reached at 07:58:11 EST Fri Jan 7 2005
~  switching-clock: clock switchover and system reset is allowed

Also... did:

gw-6509-1#remote command switch sh proc cpu

CPU utilization for five seconds: 4%/1%; one minute: 8%; five minutes: 8%


Is it just not enough load? ;)

Thanks,

Paul


Arnold Nipper wrote:
| On 21.03.2005 20:21 Paul Stewart wrote
|
|> -----BEGIN PGP SIGNED MESSAGE-----
|> Hash: SHA1
|>
|> Anyone know how to "turn these on" ?
|>
|> We have some 6509's and the LED's showing switch load never light up....
|> is this normal?
|>
|
| And what does "show proc" say?
|
|
|
|
| Arnold
|
|
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFCPyMKqMetgU57IuQRArz9AJ0d8EihOFkDQuqpzWZlIUSrwgNTegCfUC49
f1R5AsU/h8GHEfRDPAgb5xM=
=7Qnk
-----END PGP SIGNATURE-----