[c-nsp] 7200VXR- pa-mc-8t1

[MacKinnon, Ian]

This is pa-mc8E1, but should be the same
You need to create a channel group with the appropriate timeslots :-
controller E1 3/7
 framing NO-CRC4 
 channel-group 1 timeslots 1-8
 channel-group 2 timeslots 9-12
 channel-group 3 timeslots 17-20
 channel-group 13 timeslots 13-14
 channel-group 21 timeslots 21-28

And then you have sub interfaces:-

interface Serial3/7:1
 description interface 1
 ip address 10.10.1.10 255.255.255.252
!
interface Serial3/7:2
  ip address 172.16.1.122 255.255.255.252
 
!
interface Serial3/7:3
  ip address 172.16.1.186 255.255.255.252



> -----Original Message-----
> From: Scott Ingram [mailto:SIngram at clayton.com] 
> Sent: 25 March 2005 14:33
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 7200VXR- pa-mc-8t1
> 
> 
> I'm trying to configure these controllers for data point -to- point
> circuits and frame-relay.  I'm  trying to find commands to build the
> frame-relay inter/sub interface's.  Any ideas
> 
>  
> 
> Scott Ingram
> 
> Manager of Network operations and Design
> 
> Clayton Services, Inc
> 
> T: 203-926-8148
> 
> F: 203-926-5751
> 
> singram at clayton.com
> 
>  
> 
>  
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>