[c-nsp] 7200VXR- pa-mc-8t1

[Scott Ingram]

Ian,
Thank you for your help..  So, this will support frame-realy and HDLC
point to points?

-----Original Message-----
From: MacKinnon, Ian [mailto:Ian.MacKinnon at thus.net] 
Sent: Friday, March 25, 2005 9:55 AM
To: Scott Ingram; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 7200VXR- pa-mc-8t1

This is pa-mc8E1, but should be the same
You need to create a channel group with the appropriate timeslots :-
controller E1 3/7
 framing NO-CRC4 
 channel-group 1 timeslots 1-8
 channel-group 2 timeslots 9-12
 channel-group 3 timeslots 17-20
 channel-group 13 timeslots 13-14
 channel-group 21 timeslots 21-28

And then you have sub interfaces:-

interface Serial3/7:1
 description interface 1
 ip address 10.10.1.10 255.255.255.252
!
interface Serial3/7:2
  ip address 172.16.1.122 255.255.255.252
 
!
interface Serial3/7:3
  ip address 172.16.1.186 255.255.255.252



> -----Original Message-----
> From: Scott Ingram [mailto:SIngram at clayton.com] 
> Sent: 25 March 2005 14:33
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 7200VXR- pa-mc-8t1
> 
> 
> I'm trying to configure these controllers for data point -to- point
> circuits and frame-relay.  I'm  trying to find commands to build the
> frame-relay inter/sub interface's.  Any ideas
> 
>  
> 
> Scott Ingram
> 
> Manager of Network operations and Design
> 
> Clayton Services, Inc
> 
> T: 203-926-8148
> 
> F: 203-926-5751
> 
> singram at clayton.com
> 
>  
> 
>  
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.