[c-nsp] 7200VXR- pa-mc-8t1

[Scott Ingram]

Im in the US and I'm using the PA-MC-8T1 however, I cant seem to set the
frame-relay interface and set my point to point's.  I have created the
channel group's however, I cant set the frame-relay commands..  

-----Original Message-----
From: Bruce Pinsky [mailto:bep at whack.org] 
Sent: Friday, March 25, 2005 1:46 PM
To: Scott Ingram
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7200VXR- pa-mc-8t1

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Scott Ingram wrote:
| Ok,
| I tried to make these command changes:
|
| Controller T1 2/0
| All I can do is change:
| esf  Extended Superframe
|   sf   Superframe
|
| Am I missing something or do I have the wrong card ?
|

If you need E1, then you have the wrong card.  The is for T1
only.  For E1, you would need the PA-MC-8E1.  See
http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_shee
t09186a0080091d10.html

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFCRFxNE1XcgMgrtyYRAqZLAJ9wM5jh9b0IFgKzeCBu+XkohTOxDgCdFOTC
n9eSeTV/b3Nm4wlJPcTn0vA=
=GUxf
-----END PGP SIGNATURE-----