[c-nsp] 7200VXR- pa-mc-8t1

[Justin M. Streiner]

On Fri, 25 Mar 2005, Scott Ingram wrote:

> Im in the US and I'm using the PA-MC-8T1 however, I cant seem to set the
> frame-relay interface and set my point to point's.  I have created the
> channel group's however, I cant set the frame-relay commands..

Make sure you do "encapsulation frame-relay [ietf|cisco]" on the main 
interface first.  Then you should be able to create frame relay 
sub-interfaces.

jms