[c-nsp] FWSM rebooted on its own

[Richard Doty (US)]

Looks like the power to the module was turned off, do you have AAA on your catalyst logging commands?
A cat will continually reboot blades if it does not have enough power to run everything in it.
cat-1#hw-module module 4 reset cf:4
Device BOOT variable for reset = <cf:4>
Warning: Device list is not verified.
Proceed with reload of module? [confirm]
% reset issued for module 4
cat-1#
1w4d: SP: The PC in slot 4 is shutting down. Please wait ...
1w4d: SP: PC shutdown completed for module 4
1w4d: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Reset)
1w4d: SP: OS_BOOT_STATUS(4) AP OS Boot Status: finished booting
1w4d: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum Online
Diagnostics...
1w4d: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
1w4d: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now online
cat-1#
Rich

________________________________

From: cisco-nsp-bounces at puck.nether.net on behalf of John Neiberger
Sent: Mon 3/28/2005 11:42 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] FWSM rebooted on its own



We're trying to troubleshoot why the FWSM in our 6513 just rebooted. So
far, we haven't been able to determine a reason. I have no idea if it's
a bug or a hardware issue at this point so I thought I'd check to see if
anyone here had any ideas. Here are the logs from the 6513:

15w1d: SP: The PC in slot 8 is shutting down. Please wait ...
15w1d: SP: PC shutdown completed for module 8
Mar 28 09:21:09: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set
off (Reset)
Mar 28 09:23:09: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimum
Online Diagnostics...
Mar 28 09:23:11: %SVCLC-5-FWVTPMODE: VTP mode is set to
non-transparent
Mar 28 09:23:11: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online
Diagnostics
Mar 28 09:23:11: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces
are now online

And that's it. The FWSM doesn't provide any useful information that we
can find, e.g. reason for last reload.

The 6513 is running 12.1(23)E2 and the FWSM is running 1.1(3).

Any thoughts?

Thanks!
John
--
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/