[c-nsp] FWSM rebooted on its own

[John Neiberger]

The output of "show power" indicates that I have 957 Watts used out of
2331 Watts available, so I don't think it was purely a power issue
unless something else is going wrong.

John
--

>>> "Richard Doty (US)" <richard.doty at us.didata.com> 3/28/05 12:09:44
PM >>>
Looks like the power to the module was turned off, do you have AAA on
your catalyst logging commands?
A cat will continually reboot blades if it does not have enough power
to run everything in it.
cat-1#hw-module module 4 reset cf:4
Device BOOT variable for reset = <cf:4>
Warning: Device list is not verified.
Proceed with reload of module? [confirm]
% reset issued for module 4
cat-1#
1w4d: SP: The PC in slot 4 is shutting down. Please wait ...
1w4d: SP: PC shutdown completed for module 4
1w4d: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Reset)
1w4d: SP: OS_BOOT_STATUS(4) AP OS Boot Status: finished booting
1w4d: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum Online
Diagnostics...
1w4d: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
1w4d: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now
online
cat-1#
Rich

________________________________

From: cisco-nsp-bounces at puck.nether.net on behalf of John Neiberger
Sent: Mon 3/28/2005 11:42 AM
To: cisco-nsp at puck.nether.net 
Subject: [c-nsp] FWSM rebooted on its own



We're trying to troubleshoot why the FWSM in our 6513 just rebooted.
So
far, we haven't been able to determine a reason. I have no idea if
it's
a bug or a hardware issue at this point so I thought I'd check to see
if
anyone here had any ideas. Here are the logs from the 6513:

15w1d: SP: The PC in slot 8 is shutting down. Please wait ...
15w1d: SP: PC shutdown completed for module 8
Mar 28 09:21:09: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set
off (Reset)
Mar 28 09:23:09: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimum
Online Diagnostics...
Mar 28 09:23:11: %SVCLC-5-FWVTPMODE: VTP mode is set to
non-transparent
Mar 28 09:23:11: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online
Diagnostics
Mar 28 09:23:11: %OIR-SP-6-INSCARD: Card inserted in slot 8,
interfaces
are now online

And that's it. The FWSM doesn't provide any useful information that we
can find, e.g. reason for last reload.

The 6513 is running 12.1(23)E2 and the FWSM is running 1.1(3).

Any thoughts?

Thanks!
John
--
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-nsp 
archive at http://puck.nether.net/pipermail/cisco-nsp/