[c-nsp] FWSM rebooted on its own

[Josh Duffek]

What does show crash show?  I had some major problems with that 1.1.3
code and was told it was majorly buggy...I have had much better success
with 2.3.1.

Thanks,

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of John Neiberger
> Sent: Monday, March 28, 2005 1:29 PM
> To: cisco-nsp at puck.nether.net; richard.doty at us.didata.com
> Subject: RE: [c-nsp] FWSM rebooted on its own
> 
> The output of "show power" indicates that I have 957 Watts used out of
> 2331 Watts available, so I don't think it was purely a power issue
> unless something else is going wrong.
> 
> John
> --
> 
> >>> "Richard Doty (US)" <richard.doty at us.didata.com> 3/28/05 12:09:44
> PM >>>
> Looks like the power to the module was turned off, do you have AAA on
> your catalyst logging commands?
> A cat will continually reboot blades if it does not have enough power
> to run everything in it.
> cat-1#hw-module module 4 reset cf:4
> Device BOOT variable for reset = <cf:4>
> Warning: Device list is not verified.
> Proceed with reload of module? [confirm]
> % reset issued for module 4
> cat-1#
> 1w4d: SP: The PC in slot 4 is shutting down. Please wait ...
> 1w4d: SP: PC shutdown completed for module 4
> 1w4d: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Reset)
> 1w4d: SP: OS_BOOT_STATUS(4) AP OS Boot Status: finished booting
> 1w4d: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum Online
> Diagnostics...
> 1w4d: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
> 1w4d: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now
> online
> cat-1#
> Rich
> 
> ________________________________
> 
> From: cisco-nsp-bounces at puck.nether.net on behalf of John Neiberger
> Sent: Mon 3/28/2005 11:42 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] FWSM rebooted on its own
> 
> 
> 
> We're trying to troubleshoot why the FWSM in our 6513 just rebooted.
> So
> far, we haven't been able to determine a reason. I have no idea if
> it's
> a bug or a hardware issue at this point so I thought I'd check to see
> if
> anyone here had any ideas. Here are the logs from the 6513:
> 
> 15w1d: SP: The PC in slot 8 is shutting down. Please wait ...
> 15w1d: SP: PC shutdown completed for module 8
> Mar 28 09:21:09: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set
> off (Reset)
> Mar 28 09:23:09: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimum
> Online Diagnostics...
> Mar 28 09:23:11: %SVCLC-5-FWVTPMODE: VTP mode is set to
> non-transparent
> Mar 28 09:23:11: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online
> Diagnostics
> Mar 28 09:23:11: %OIR-SP-6-INSCARD: Card inserted in slot 8,
> interfaces
> are now online
> 
> And that's it. The FWSM doesn't provide any useful information that we
> can find, e.g. reason for last reload.
> 
> The 6513 is running 12.1(23)E2 and the FWSM is running 1.1(3).
> 
> Any thoughts?
> 
> Thanks!
> John
> --
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/