[c-nsp] c7206VXR(NPE-G1) w/ 12.2(18)S8 - Memory failures

Nick Shah Nick.Shah at aapt.com.au
Tue Mar 29 06:43:25 EST 2005


Hi Santiago

Have you got soft reconfiguration enabled on any peers ?

Try disabling it, that may help recover some memory.

rgds

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Santiago Felipe Perez
Sent: Tuesday, 29 March 2005 6:35 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] c7206VXR(NPE-G1) w/ 12.2(18)S8 - Memory failures



Hi,

we are using IOS 12.2(18)S8 in some of our router and sometimes when we make changes on the BGP policy we run out of largest memory, and we are not able to see the running-config or to save running-config to startup-config and to solve this problem we have to reload the router.
 
Our routers are 7206VXR witch NPE-G1 with 256M and the routers are configured with MPLS and managing BGP tables around 160.000 prefixes, we have openned a TAC case but Cisco engineer told us that bug CSCdy18789 is solved in 12.2(18)S8 and that Cisco recommends 512M of memory for routers that manages between 100.000 and 200.000 BGP routes.
 
Have anyone had the same problem?, do you think that the problem will be solved upgrading memory to 512M? because we have other routers with 12.2(14)S and we haven´t experienced this problem.

Waiting for your answer.
Regards
	
Santiago Felipe Pérez
Ingeniero de Redes
acens Technologies S.A

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


This communication, including any attachments, is confidential. If 
 you are not the intended recipient, you should not read it - please 
 contact me immediately, destroy it, and do not copy or use any part of 
 this communication or disclose anything about it.





More information about the cisco-nsp mailing list