[c-nsp] still cable pinout trouble ...

[Pete Templin]

Florian Taeger wrote:

> I still got this #+$&%§ problem with connecting a WIC-1T Module to a leased
> line.

Won't work.

> The end of the line is a RJ-45 Connector with pins 1&2 (RX) and 4&5 (TX).

Yep, with some sort of T1 or E1 framing & coding.

> But I still don't know how to connect this line to my wic-1t.

Won't work.

> I know the rj45-pinout. And I think i know the pinout for the db60 connector at
> the WIC-1T: Pins 11&12 are TX and 28&27 are RX (at a DTE cable) ..

WIC-1T is outputting (and expecting to input) serial bits.

> But if I connect the RJ45 cable with the DB60 connector, the line does not work.
> If I use a cisco 2600 with an 1CE1B module (DB15 connector) this line works
> properly. So it is supposed to be a problem with the wiring of my adapter
> cable.

Need CSU/DSU (or replace WIC-1T with WIC-1DSU-T1 or WIC-1DSU-E1 if it 
exists and you need E1) in the middle to connect these.  Network devices 
101.

pt