[c-nsp] OC3 Card Recommendations for 7200 NPE-G1

[Arie Vayner]

You have no real options... it's the same card, either MultiMode or
SingleMode (which depends on the circuit type).
7200 does all processing in CPU in any way, and an NPE-G1 would handle
such a circuit with no trouble (unless you have much more other
traffic on the router)

Arie Vayner
CCIE#12198


On Wed, 30 Mar 2005 09:25:30 -0500, Brant I. Stevens <branto at branto.com> wrote:
> All,
> 
> I'm looking for recommendations for cards for the 7200 that can handle
> line-rate OC3 traffic, with QoS and some ACLs.
> 
> My reseller has suggested the following part number:
> 
> PA-POS-OC3MM=
> 
> But I figure I'd ask the list for their viewpoint on this and/or any other
> part numbers.
> 
> Regards,
> Brant.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>