[c-nsp] OC3 Card Recommendations for 7200 NPE-G1

[Clayton Zekelman]

The PA-POS-OC3MM or PA-POS-OC3SMI would be for Packet over Sonet OC3.

You would need a PA-A3-OC3MM or PA-A3-OC3SMI or PA-A6-OC3MM or PA-A6-OC3SMI for ATM OC3

Be sure you cehck what type of circuit is being supplied (POS or ATM).



----- Original Message ---------------

Subject: Re: [c-nsp] OC3 Card Recommendations for 7200 NPE-G1
   From: Arie Vayner <arievayner at gmail.com>
   Date: Wed, 30 Mar 2005 23:23:28 +0200
     To: "Brant I. Stevens" <branto at branto.com>
     Cc: cisco-nsp at puck.nether.net

>You have no real options... it's the same card, either MultiMode or
>SingleMode (which depends on the circuit type).
>7200 does all processing in CPU in any way, and an NPE-G1 would handle
>such a circuit with no trouble (unless you have much more other
>traffic on the router)
>
>Arie Vayner
>CCIE#12198
>
>
>On Wed, 30 Mar 2005 09:25:30 -0500, Brant I. Stevens <branto at branto.com> wrote:
>> All,
>> 
>> I'm looking for recommendations for cards for the 7200 that can handle
>> line-rate OC3 traffic, with QoS and some ACLs.
>> 
>> My reseller has suggested the following part number:
>> 
>> PA-POS-OC3MM=
>> 
>> But I figure I'd ask the list for their viewpoint on this and/or any other
>> part numbers.
>> 
>> Regards,
>> Brant.
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/