[c-nsp] IOS 12.4 and NAT

[Kevin Graham]

On 5/3/05, Brian Vowell <brian at zipsend.net> wrote:

> In addition to configuring an interface as either inside or outside, you
> also now have to enter the interface command "ip nat enable" on an
> interface that you would like to setup NAT.

Had you tried this under 12.3(14)T? Didn't realize specifiying
inside/outside interfaces didn't imply 'ip nat enable', but w/ the NVI
enhancement, 'ip nat enable' is all you should need now.