[c-nsp] IOS 12.4 and NAT

[Brian Vowell]

Well ours is a 1721, so I'm assuming the code is substantially 
different.  This same router with the smaller config is also crashing 
quite a bit under 12.3(14)T1.  It's crashing about once per hour, so I 
may have to drop it down to 12.3 mainline to get it to quit acting up.


--b

Denny Reiter wrote:

>On Tue, May 03, 2005 at 04:34:30PM -0700, Brian Vowell wrote:
>  
>
>>I could not get NAT to allow any translations without the enable 
>>command.  I've been having all sorts of problems with 12.4(1) all day, 
>>so I downgraded to 12.3(14)T1, and the command shows up there too.
>>
>>What hardware are you running 12.4(1.2) on?
>>    
>>
>
>
>7206VXR with an NPE-G1
>
>We were running 12.3(14)T1 but couldn't keep it stable.  A crash
>was guaranteed within 3 days.  I was also running it on a new router
>yet to be put into service and it logged spurious memory access
>errors all over the place with absolutely no traffic running through
>it.
>
>
>Denny
>  
>