[c-nsp] Multilink PPP over ATM for ADSL

Nigel Camp nigelc at iexec.com.au
Sun May 8 20:16:41 EDT 2005


 > Just wondering if anyone has got this working (or similar working) as 
from
 > all of the debugging I have done, it doesn't appear to attempt to 
bundle the
 > lines, just performs individual logins for each line.

Make sure you have this under the vpdn group:

lcp renegotiation always

This will allow the cpe and lns to re-negotiate for ppp multilink, if 
the cpe asks for it.

Nigel


On 08/05/2005, at 6:23 PM, Gert Doering wrote:

> Hi,
>
> On Sat, May 07, 2005 at 10:39:01PM -0400, Robert Boyle wrote:
>> not sure how it works on a 7301, but I imagine it would be similar. 
>> You
>> just need to create a multilink interface and assign both ATM 
>> interfaces to
>> the same multilink group as you assigned to the multilink interface. 
>> The
>> setup is the same as for any multilink PPP interface. It works great.
>
> Could you share the resulting configuration?  I'm not really sure how 
> the
> parts fit together if PPPoATM is part of it (having only done multilink
> PPP over leased lines and ISDN so far).
>
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                            
> //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             
> gert at greenie.muc.de
> fax: +49-89-35655025                        
> gert at net.informatik.tu-muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



More information about the cisco-nsp mailing list