[c-nsp] second supervisor engine on 7609
Ian Cox
icox at cisco.com
Tue May 10 08:53:01 EDT 2005
At 07:35 AM 5/10/2005 -0500, Brad Swanson wrote:
>I second the ROMMON issue, been there done that... Everything
>worked fine after getting the RP to boot properly. Did not have to
>put the card into a second chassis though, just fiddled with it on
>the live box with no problems.
>
>Should the standby be 0x2 or 0x2102?
Both will work. Downside of 0x2 is that if break gets issued you end
up in rommon. That is a good thing for the way I work, a bad thing
for production boxes where most people don't want them sitting in the rommon.
Ian
>>From: Ian Cox <icox at cisco.com>
>>To: Vects <alexc at actcom.co.il>, cisco-nsp at puck.nether.net
>>Subject: Re: [c-nsp] second supervisor engine on 7609
>>Date: Tue, 10 May 2005 04:08:12 -0700
>>
>>Does the 2nd Supervisor go any further than the output provided
>>below. The output below just shows the SP side booting of the 2nd
>>supervisor. The RP side also has to boot up, does it stop at a rommon
>>prompt? if it does change the configuration register to 0x2 and type
>>reset to get the RP to boot on the backup. -> You may want to get the
>>second supervisor booting correctly in another chassis, and when it
>>is ok, put it in this chassis.
>>
>>
>>Ian
>>
>>
>>At 01:14 PM 5/10/2005 +0300, Vects wrote:
>> >Hi,
>> >I'm encountered a problem with activation of second supervisor engine on
>> >our 7609, it looks like secondary supervisor engine is booting well
>> >after hot insertion to chassis but it's not recognized by system, I've
>> >got 'Supervisor-Other' by 'sh module' command, see below.
>> >Could somebody help me with it?
>> >I don't want to reboot router, it will disconnects many users of ours.
>> >
>> >Thanks, Alexc
>> >
>> >sh module output:
>> >Mod Ports Card Type Model
>>Serial No.
>> >--- ----- -------------------------------------- ------------------
>> >-----------
>> > 1 2 Catalyst 6000 supervisor 2
>> > (Active) WS-X6K-S2U-MSFC2 SAD054600JF
>> > 2 0 Supervisor-Other Unknown
>>Unknown
>> > 3 0 2 port adapter
>> > FlexWAN WS-X6182-2PA SAD044207FV
>> > 4 8 8 port 1000mb
>> > ethernet WS-X6408-GBIC SAD04130F1Y
>> >
>> >Mod MAC addresses Hw Fw Sw
>>Status
>> >--- ---------------------------------- ------ ------------
>> >------------ -------
>> > 1 0001.6415.8aa6 to 0001.6415.8aa7 3.2 6.1(4) 12.1(20)E2
>>Ok
>> > 2 0000.0000.0000 to
>> > 0000.0000.0000 0.0 Unknown Unknown Unknown
>> > 3 0003.32b9.151a to 0003.32b9.1559 1.3 12.1(20)E2 12.1(20)E2
>>Ok
>> > 4 00d0.d337.cf48 to 00d0.d337.cf4f 2.4 5.1(1)CSX 8.2(0.58)TFW Ok
>> >
>> >Mod
>> >Sub-Module Model Serial Hw
>>Status
>> >--- --------------------------- --------------- ---------------
>> >------- -------
>> > 1 Policy Feature Card 2 WS-F6K-PFC2 SAD054506NB 2.0
>>Ok
>> > 1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD054504DY 1.2
>>Ok
>> > 2 Policy Feature Card 2 WS-F6K-PFC2 SAL082292PH 3.4
>>Other
>> >
>> >Mod Online Diag Status
>> >--- -------------------
>> > 1 Pass
>> > 2 Unknown
>> > 3 Not Applicable
>> > 4 Pass
>> >
>> >sh version output:
>> >Cisco Internetwork Operating System Software
>> >IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E2, EARLY
>> >DEPLOYMENT RELEASE SOFTWARE (fc1)
>> >TAC Support: http://www.cisco.com/tac
>> >Copyright (c) 1986-2004 by cisco Systems, Inc.
>> >Compiled Fri 30-Jan-04 22:36 by pwade
>> >Image text-base: 0x40008F90, data-base: 0x41850000
>> >
>> >ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
>> >BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E2, EARLY
>> >DEPLOYMENT RELEASE SOFTWARE (fc1)
>> >
>> >rtr76 uptime is 8 weeks, 1 day, 8 hours, 16 minutes
>> >Time since rtr76 switched to active is 8 weeks, 1 day, 8 hours, 17
>> >minutes
>> >System returned to ROM by power-on (SP by power-on)
>> >System restarted at 01:47:07 UTC Mon Mar 14 2005
>> >System image file is "slot0:c6sup22-psv-mz.121-20.E2.bin"
>> >
>> >cisco OSR-7609 (R7000) processor (revision 3.1) with 458752K/65536K
>> >bytes of memory.
>> >Processor board ID TBA05450364
>> >R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
>> >Cache
>> >Last reset from power-on
>> >X.25 software, Version 3.0.0.
>> >Bridging software.
>> >1 FlexWAN controller (2 ATM).
>> >62 Virtual Ethernet/IEEE 802.3 interface(s)
>> >10 Gigabit Ethernet/IEEE 802.3 interface(s)
>> >2 ATM network interface(s)
>> >381K bytes of non-volatile configuration memory.
>> >
>> >16384K bytes of Flash internal SIMM (Sector size 512K).
>> >Configuration register is 0x102
>> >
>> >
>> >output on console of second supervisor engine:
>> >Autoboot executing command: "boot
>> >slot0:"
>> >
>> >
>> >Self decompressing the image : ###..### [OK]
>> >
>> >
>> > Restricted Rights Legend
>> >
>> >
>> >Use, duplication, or disclosure by the Government
>> >is
>> >subject to restrictions as set forth in
>> >subparagraph
>> >(c) of the Commercial Computer Software -
>> >Restricted
>> >Rights clause at FAR sec. 52.227-19 and
>> >subparagraph
>> >(c) (1) (ii) of the Rights in Technical Data and
>> >Computer
>> >Software clause at DFARS sec.
>> >252.227-7013.
>> >
>> >
>> > cisco Systems,
>> > Inc.
>> > 170 West Tasman
>> > Drive
>> > San Jose, California 95134-1706
>> >
>> >
>> >
>> >Cisco Internetwork Operating System
>> >Software
>> >IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 13.1(20)E2,
>> >EARLY DEPLOYM
>> >ENT RELEASE SOFTWARE
>> >(fc1)
>> >TAC Support:
>> >http://www.cisco.com/tac
>> >Copyright (c) 1986-2004 by cisco Systems,
>> >Inc.
>> >Compiled Fri 30-Jan-04 23:13 by
>> >pwade
>> >Image text-base: 0x40020F90, data-base:
>> >0x4097A000
>> >
>> >
>> >
>> >
>> >00:00:02: %PFREDUN-6-STANDBY: Initializing as STANDBY
>> >processor
>> >00:00:03: %C6K_PLATFORM-5-MISMATCH: 'sup-bootflash' device
>> >programming algorithm
>> >mismatch detected on SP (module: 2), formatting is
>> >recommended.
>> >00:00:08: %OIR-SP-STDBY-6-CONSOLE: Changing console ownership to
>> >route processor
>> >
>> >
>> >_______________________________________________
>> >cisco-nsp mailing list cisco-nsp at puck.nether.net
>> >https://puck.nether.net/mailman/listinfo/cisco-nsp
>> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>>_______________________________________________
>>cisco-nsp mailing list cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list