[c-nsp] any way to identify DFC on my 6500 linecards?
David Sinn
dsinn at dsinn.com
Wed May 11 18:33:28 EDT 2005
The output of a show module will tell you what module you have on
each line card:
Mod Sub-Module Model Serial
Hw Status
--- --------------------------- ------------------ ------------
------- -------
1 Distributed Forwarding Card WS-F6700-DFC3A -----------
2.0 Ok
2 Distributed Forwarding Card WS-F6700-DFC3A -----------
2.0 Ok
3 Distributed Forwarding Card WS-F6700-DFC3A -----------
2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL -----------
1.3 Ok
5 MSFC3 Daughterboard WS-SUP720 -----------
2.1 Ok
So the above box has a Sup720 with PFC3BXL, but the LC's have DFC3A's...
Mod Sub-Module Model Serial
Hw Status
--- --------------------------- ------------------ ------------
------- -------
1 Distributed Forwarding Card WS-F6700-DFC3B -----------
2.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3B -----------
2.0 Ok
5 MSFC3 Daughterboard WS-SUP720 -----------
2.3 Ok
8 Distributed Forwarding Card WS-F6700-DFC3B -----------
2.0 Ok
Things are a bit better on this box... ;)
David
On May 11, 2005, at 1:48 PM, Mark Boolootian wrote:
>
> While reading release notes for 12.2SX, I discovered that the
> sup720 PFC3BXL
> operation is dependent on the linecard DFCs. To wit,
>
> DFC3A-equipped modules => the PFC3BXL functions as a PFC3A.
> DFC3B-equipped modules => the PFC3BXL functions as a PFC3B.
> DFC3BXL-equipped modules => the PFC3BXL functions as a PFC3BXL.
>
> Is there any way to determine what DFC a linecard has from the command
> line? The command 'show platform hardware pfc mode' says:
>
> PFC operating mode : PFC3BXL
>
> which leads me to believe I must have DFC3BXLs.
>
> Many thanks in advance for all clue,
> mb
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
More information about the cisco-nsp
mailing list