[c-nsp] any way to identify DFC on my 6500 linecards?

[Ram S]

David,
So in your case, does the system operates with
PFC3BXL capability. I am asking this becos some cards
have DFC3A whereas SUP has PFC3BXL

Thanks,
Ram.



--- David Sinn <dsinn at dsinn.com> wrote:
> The output of a show module will tell you what
> module you have on  
> each line card:
> 
> Mod Sub-Module                  Model             
> Serial         
> Hw     Status
> --- --------------------------- ------------------
> ------------  
> ------- -------
>    1 Distributed Forwarding Card WS-F6700-DFC3A    
> -----------    
> 2.0    Ok
>    2 Distributed Forwarding Card WS-F6700-DFC3A    
> -----------    
> 2.0    Ok
>    3 Distributed Forwarding Card WS-F6700-DFC3A    
> -----------    
> 2.0    Ok
>    5 Policy Feature Card 3       WS-F6K-PFC3BXL    
> -----------    
> 1.3    Ok
>    5 MSFC3 Daughterboard         WS-SUP720         
> -----------    
> 2.1    Ok
> 
> So the above box has a Sup720 with PFC3BXL, but the
> LC's have DFC3A's...
> 
> Mod Sub-Module                  Model             
> Serial         
> Hw     Status
> --- --------------------------- ------------------
> ------------  
> ------- -------
>    1 Distributed Forwarding Card WS-F6700-DFC3B    
> -----------    
> 2.0    Ok
>    5 Policy Feature Card 3       WS-F6K-PFC3B      
> -----------    
> 2.0    Ok
>    5 MSFC3 Daughterboard         WS-SUP720         
> -----------    
> 2.3    Ok
>    8 Distributed Forwarding Card WS-F6700-DFC3B    
> -----------    
> 2.0    Ok
> 
> Things are a bit better on this box... ;)
> 
> David
> 
> On May 11, 2005, at 1:48 PM, Mark Boolootian wrote:
> 
> >
> > While reading release notes for 12.2SX, I
> discovered that the  
> > sup720 PFC3BXL
> > operation is dependent on the linecard DFCs.  To
> wit,
> >
> >   DFC3A-equipped modules => the PFC3BXL functions
> as a PFC3A.
> >   DFC3B-equipped modules => the PFC3BXL functions
> as a PFC3B.
> >   DFC3BXL-equipped modules => the PFC3BXL
> functions as a PFC3BXL.
> >
> > Is there any way to determine what DFC a linecard
> has from the command
> > line?  The command 'show platform hardware pfc
> mode' says:
> >
> >   PFC operating mode : PFC3BXL
> >
> > which leads me to believe I must have DFC3BXLs.
> >
> > Many thanks in advance for all clue,
> > mb
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at
> http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
> 


		
Discover Yahoo! 
Find restaurants, movies, travel and more fun for the weekend. Check it out! 
http://discover.yahoo.com/weekend.html