[c-nsp] RE: PAT based on source IP?

[Dave Temkin]

Thanks for the answers thus far... Just to clarify, I want to do this in 
plain vanilla IOS, not a CSS/Foundry/other load balancer.

Thanks,
-dave


---------- Forwarded Message -----------
From: "Dave Temkin" <dave at ordinaryworld.com>
To: cisco-nsp at puck.nether.net
Sent: Tue, 17 May 2005 15:19:03 -0400
Subject: PAT based on source IP?

Does anyone know if it's possible without using some sort of load-balancer 
device (CSS, Foundry, etc.) to perform PAT based on source IP?

Ie, if traffic is coming from 1.1.1.1 destined to port 9800 I want to change 
the destination to 2.2.2.2 on port 9500.

This needs to be scalable (ie, I can define 50 of these, not just 1).

I can do basic PAT to change the destination port, but that doesn't help me 
here as I need different destination ports depending on the source for a 
financial application.

Thanks,
-Dave
------- End of Forwarded Message -------


David Temkin