[c-nsp] Monitoring gigabit subinterface

[Raj Panchal]

Visit www.cacti.net , you will find a GUI tool which takes care of all types
of interfaces 
Also its based on RRD


Raj

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Silvia García Nieto
Sent: Thursday, May 26, 2005 2:58 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Monitoring gigabit subinterface

I am trying to monitor a Gigabit Subinterface using MRTG but MRTG 
records the Bandwith of the main interface. The router is a Cisco 7206 
VXR. The IOS version Version 12.1(3a)E5
The configuration:

/interface GigabitEthernet4/0.103
 encapsulation dot1Q 103
 ip address 192.168.200.13 255.255.255.252
 no cdp enable/

How can i monitor the subinterface?
Thanks in advance!

Silvia