[c-nsp] Monitoring gigabit subinterface

[Nitzan Tzelniker]

I think you have a problem in your version.
not all IOS version have snmp counters for sub interfaces try to upgrade to 
a newer version
  Nitzan
 On 5/26/05, Silvia García Nieto <sgarcia at tid.es> wrote: 
> 
> I am trying to monitor a Gigabit Subinterface using MRTG but MRTG
> records the Bandwith of the main interface. The router is a Cisco 7206
> VXR. The IOS version Version 12.1(3a)E5
> The configuration:
> 
> /interface GigabitEthernet4/0.103
> encapsulation dot1Q 103
> ip address 192.168.200.13 <http://192.168.200.13> 255.255.255.252<http://255.255.255.252>
> no cdp enable/
> 
> How can i monitor the subinterface?
> Thanks in advance!
> 
> Silvia
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>