[c-nsp] Cisco 1812W & IOS 12.4(2)T1 & CBAC/Firewall

[Brett Looney]

At 11:46 2/11/2005, you wrote:
>I have just gotten a Cisco 1812W (the 1800 series with
>built in wireless). It is generally working fine
>(wireless, routing, etc) except that I couldn't get
>the built in firewall & IDS to work.
>
>In a nutshell, whenever I tried to enable "ip inspect"
>or "ip ips" on the internal BVI1 interface, all
>UDP/TCP traffic stops. ICMP traffic works fine though.
>No NAT is involved.

Why are you using a BVI interface? I recently did an 1801W and I just 
put an IP address directly on the Dot11Radio0 interface and did the 
filtering there...

B.