[c-nsp] High Availability PoP Design

[Mark Tohill]

Gert,

I take it same would hold for 7204VXR with NPE-G1?

Mark

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: 02 November 2005 17:37
To: David Coulson
Cc: Michael Markstaller; cisco-nsp at puck.nether.net; Mark Tohill
Subject: Re: [c-nsp] High Availability PoP Design

Hi,

On Wed, Nov 02, 2005 at 11:48:22AM -0500, David Coulson wrote:
> bridge 100 proto ieee
> bridge 100 route ip
> 
> int f0/0/0.100
> encap dot 100
> bridge-group 100
> 
> int f6/0/0.100
> encap dot 100
> bridge-group 100

This will give you maximum redundancy, but I'm afraid it will also give
you worst performance - unless I'm grossly mistaken, this is going to
run in process switched mode on the RSP, no CEF, no dCEF :(

gert
-- 
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de