[c-nsp] STM1 Inteface

[MacKinnon, Ian]

> -----Original Message-----
> From: Tim Franklin [mailto:tim at colt.net] 
> Sent: 03 November 2005 15:55
> To: MacKinnon, Ian; 'Mounir Mohamed'; 'Oliver Boehmer (oboehmer)'
> Cc: cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] STM1 Inteface
> 
> > > > I think you want Channelised STM-1, PA-MC-STM1-xxx where
> > xxx can be
> > > > things like MM, SMI etc Lets you break out n x 64k with
> > > some limits on
> > > > total number of groups.
> > > 
> > > Obviously you can't use the PA directly in the 7609, although
> >  
> > Obviously I should pay more attention to the original post :)
> 
> Sorry, that was meant to be helpful rather than a dig - the 
> OP did ask about
> 7304 too...
Don't worry, that was the way I took it :)