[c-nsp] Catalyst 2900/3500 with Cisco 2509/2511 Console Access

[Bruce Pinsky]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Eric Kagan wrote:
> I have been trying to get some Catalyst 2900/3500 switches to work with a
> Cisco 2511 console router.  The routers (3600/7200) all work fine (std
> 9600,n,8,1) but when I try to reverse telnet connect to a catalyst it never
> makes a connection (it will try and then timeout after about 10-15 seconds).
> I have tried to do google searches, tech notes, sample configs but to no
> avail.  Is there something I am missing here.  Its a problem with multiple
> routers and switches cable sets etc so its not just 1 bad connection.  Any
> configs, tips, links is appreciated.
>  


Have you looked at:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFDcbL1E1XcgMgrtyYRAlkUAJ9AZxtPV/n12fES7OBCSqu3o4AsOwCfceJl
Nsd6zWrM9r2QcVaGGYzBsMI=
=0Aji
-----END PGP SIGNATURE-----