[c-nsp] MC3810 Active DS0 via SNMP

[Dmitry A.Deineka]

Greetings,

	We have a number of old but good :-) Cisco MC3810 with ISDN PRI port. 
Is there any ideas about retrieving ISDN usage by SNMP ?

Well known OID like:

1.3.6.1.4.1.9.10.19.1.1.4
cpmActiveDS0s OBJECT-TYPE
	-- FROM	CISCO-POP-MGMT-MIB
	SYNTAX		Gauge
	MAX-ACCESS	read-only
	STATUS		Current
	DESCRIPTION    "The number of DS0s that are currently in use."

does not work with MC3810 but works great with AS5350 or another AS.

%snmpwalk -v 1 MC3810 1.3.6.1.4.1.9.10.19.1.1.4
%snmpwalk -v 1 AS5350 1.3.6.1.4.1.9.10.19.1.1.4
SNMPv2-SMI::enterprises.9.10.19.1.1.4.0 = Gauge32: 74

Any ideas ?

Regards,
   Dmitry

-- 
   Dmitry A.Deineka                DAD1-UANIC  DD518-RIPE
   iTL Company, Kharkov UA         phone: +380 57 7630001
   http://www.itl.ua               fax:   +380 57 7630004