[c-nsp] vlan.dat

[Matt Addison]

For backup purposes you can save vlan.dat from flash to a tftp server.
I've used this to upgrade several 3500s in the past.

~Matt 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Marko
Milivojevic
Sent: Tuesday, November 15, 2005 6:44 AM
To: jan gregor
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] vlan.dat


	If you configure the switch to operate VTP in transparent mode
(vtp mode transparent), VLAN data will be saved with the config. If you
are relying on VTP to create VLAN's, forget about this :-(.

Marko.

jan gregor wrote:
> Hello,
> 
> is there any way to force 2950 switch to save vlan information to 
> startup config? This is for backup / grep purposes. The vlan is 
> visible via "show vlan", file vlan.dat exists, but there is no vlan in

> "show startup-config". Software image is
c2950-i6q4l2-mz.121-22.EA4.bin.
> Many thanks for any pointers.
> 
> Best regards,
> 
> Jan Gregor
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/