[c-nsp] SNMP problem

[Gordon Bezzina]

Hello,

I have just experienced something very weird!

I just had a faulty PA-A3-OC3 card on a VIP2-50 in a Cisco 7576 Router.

I took the opportunity whilst replacing the card and replaced it with a
PA-A3-OC3 on a VIP4-80.

Now everything is working fine except that only one sub-interface (out of
48) although it is working fine and moving traffic does not show on SNMP -
actually both Solarwinds and MRTG show the interface down - no traffic. 

interface ATM5/0/0.50 point-to-point
 ip vrf forwarding R1
 ip address ##### #####
 pvc 0/50
  vbr-nrt 35000 35000 16000
  oam-pvc manage 20
  oam retry 2 10 2
 !

Is this an snmp problem ? and if so is there a way to re-initialise the SNMP
server data and indexes without reload the router.


Thanks You in Advance

Gordon