[c-nsp] SNMP problem

[Anning, Mike]

Ifindex probably changed, you will likely need to setup the SNMP sensor
again

Hopefully this should help explain.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a
0080134eec.shtml


Cheers
Mike




-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Gordon Bezzina
Sent: 18 November 2005 17:15
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] SNMP problem



Hello,

I have just experienced something very weird!

I just had a faulty PA-A3-OC3 card on a VIP2-50 in a Cisco 7576 Router.

I took the opportunity whilst replacing the card and replaced it with a
PA-A3-OC3 on a VIP4-80.

Now everything is working fine except that only one sub-interface (out
of
48) although it is working fine and moving traffic does not show on SNMP
- actually both Solarwinds and MRTG show the interface down - no
traffic. 

interface ATM5/0/0.50 point-to-point
 ip vrf forwarding R1
 ip address ##### #####
 pvc 0/50
  vbr-nrt 35000 35000 16000
  oam-pvc manage 20
  oam retry 2 10 2
 !

Is this an snmp problem ? and if so is there a way to re-initialise the
SNMP server data and indexes without reload the router.


Thanks You in Advance

Gordon


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/