[c-nsp] Cisco 7301 and PA-2FE-TX

[Steve Wright]

Hi all,

I'm struggling to get a PA-2FE-TX/PA-2FEISL-TX working in a Cisco 7301. This
is supposedly supported, and I currently have the case open with TAC, but
just wanted to know if anyone else had managed to get this working in a
7301?

TAC agree that this should work, but haven't come up with a solution yet!

When inserted it comes up with the following error message...
*Nov 18 00:08:36.507: %PA-3-NOTSUPPORTED: PA in slot1 (Fastethernet
(TX-ISL)) is not supported on this c7301 processor
*Nov 18 00:08:36.507: %PA-3-DEACTIVATED: port adapter in bay [1] powered
off.
*Nov 18 00:08:36.607: %PA-2-PABRIDGE: Failed to config bridge for PA 1

show diag gives the following info (this is from it being in a 7200 chassis)

        Fastethernet (TX-ISL) Port adapter, 2 ports
        Port adapter is analyzed
        Port adapter insertion time 00:00:06 ago
        EEPROM contents at hardware discovery:
        Hardware revision 2.0           Board revision B0
        Serial number     16741830      Part number    73-2618-03
        FRU Part Number:  PA-2FE-TX=, PA-2FEISL-TX=

        Test history      0x0           RMA number     00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x00: 01 6C 02 00 00 FF 75 C6 49 0A 3A 03 00 00 00 00
          0x10: 58 00 00 00 00 05 03 00 00 00 FF FF FF FF FF 00


Currently running IOS version 12.3(11)T7 on the 7301

Any help much appreciated!

Thanks,

S



This message has been scanned for viruses by MailController - www.MailController.altohiway.com