[c-nsp] 3620 and WIC-1ADSL

[Brett Looney]

At 22:39 22/11/2005, you wrote:
>It will not work in a NM-1E2W or a NM-2E2W. You will need a 
>NM-1FE2W, NM-2FE2W, or a NM-2W to use the WIC-1ADSL. We also 
>recommend using 12.3(16) It will show up as an ATM interface. You 
>need to make sure your image supports ATM and optionally PPPoE/PPPoA 
>if you need it.

And that would be the reason why. We're using a NW-1E2W. Damn. Is 
this information anywhere on the cisco site? I would have done a 
build using the configurator but the 3620 is EOL...

B.