[c-nsp] AP 1300 & WDS

[Sergey Velikanov [Intelsoft]]

Asbjorn Hojmark - Lists wrote:
>>I'am trying run WDS on my Cisco AP 1300G  (Version 
>>12.3(7)JA1) in manual we can see than it can be enabled by next
>>config
> 
> 
> The manual says (http://tinyurl.com/aurfj): "Note: This command
> is not supported on bridges and 350 series access points." Your
> 1300 is a bridge device.
> 
> -A
> 
> 

But why in documentation we can say screenshots with wds configuration example,
also I've discovered one of our AP 1300 run with IOS Version 12.3(2)JA2 and

anrozybakiev(config)#wlccp ?
   ap                     Enable WLCCP AP
   authentication-server  Authentication Server
   wds                    Enable Wireless Domain Service Manager
   wnm                    Configure Wireless Network Manager