[c-nsp] C7200-I/O-2FE/E and NPE-300

[David Freedman]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Appears to work:

router>sh ver | in NPE
cisco 7206VXR (NPE300) processor with 229376K/65536K bytes of memory.

router>sh ip int brie | in ast
FastEthernet0/0        1.2.3.4    YES NVRAM  up                    up
FastEthernet0/1        5.6.7.8    YES NVRAM  up                    up

router>sh diag 0 | in adap
~        Dual FastEthernet (RJ-45) I/O Card Port adapter, 2 ports
~        Port adapter is analyzed
~        Port adapter insertion time 21w0d ago


Don't forget, slot 0 is on bus 0, which has a capacity of 600
bandwidth points.

C7200-I/O-2FE/E  = 400 points, 200 for controler & 200 for both ethernet
ports which share only 100 mb/s bandwidth.



- --
David Freedman
Network Engineering Department
Claranet UK Limited
http://www.clara.net


james edwards wrote:
| Can you use a C7200-I/O-2FE/E on a NPE-300 VXR ? I am getting conflicting
| answers
| from  vendors.
|
http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet09186a0080088724.html
| Table 7 seems to indicate NPE-255, XVR (with qualifications to specific
| hardware rev) is the minimum for the I/O-2FE/E.
|
| James
| Routing and Security Administrator
| At the Santa Fe Office: Cyber Mesa Telecom
| jamesh at cybermesa.com  noc at cybermesa.com
| http://www.cybermesa.com/ContactCM
|
| _______________________________________________
| cisco-nsp mailing list  cisco-nsp at puck.nether.net
| https://puck.nether.net/mailman/listinfo/cisco-nsp
| archive at http://puck.nether.net/pipermail/cisco-nsp/
|

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFDS7bPtFWeqpgEZrIRAkypAJ9XElon+e8D9OeeRXdLtYyzO8groQCfZiBN
NurtHUq9C4NPhkBpauDFZMA=
=/TbF
-----END PGP SIGNATURE-----